'building management system hvac'

Description: Central monitoring & control of HVAC, lighting, energy, water, fire and security on a single BMS platform. We design IO, graphics, trends and alarms so operations teams actually use the system for decisions. Compliances: BACnet/Modbus interoperability; IS/IEC controls; cyber hygiene for OT networks. Benefits: Lower energy, faster fault detection, better comfort & governance with reports/dashboards. Why Choose Us: Vendor‑neutral sequences, clean graphics, SOPs, and training aligned to your site.

Description: Our Turnkey MEP Solutions are built for clients who want a single partner for all building services instead of coordinating 4–5 separate agencies. We take over the complete MEP-F scope – design coordination with architect/PMC, BOQ finalization, supply of approved makes, site execution, testing/commissioning and authority clearances (fire, water, DISCOM/CEIG as applicable). The result is a clash-free, inspection-ready, cost-optimised services package delivered by one accountable team. Mechanical (M) Scope: - HVAC: chiller / VRF-VRV / ventilation / pressurization - Utility piping where applicable - Equipment installation: AHUs, pumps, fans, cooling towers Electrical (E) Scope: - HT/LT panels, PCC/MCC/APFC, cabling & terminations - Earthing & lightning protection - DG/UPS/LV/ELV integration - Lighting & small power for building/common areas Plumbing (P) Scope: - Water supply & internal plumbing - Drainage, rainwater, harvesting connections - Domestic and firefighting pump rooms (segregated) Fire (F) Scope: - Hydrant, sprinkler, detection, gas suppression - Pump room and NOC documentation Compliances: - NBC 2016 – building services & fire - IS / ASHRAE good practices for HVAC - IS / IEC for electrical & earthing - Local plumbing/water supply bye-laws - DISCOM / CEIG / Fire Brigade requirements Benefits: - One vendor → one timeline → one handover - Common supports/trenches/shafts → cost optimisation - Faster authority approvals because documents come from one source - Easier for facility/maintenance teams to run systems post-handover Why Choose Us: - We already execute fire + LV + utilities → adding HVAC, electrical & plumbing is seamless - Experienced in factories, commercial, IT/office, hospitals, warehouses - Strong site management with DPRs, QAP, test reports and stage-wise billing - Local presence in Pune, Mumbai, Bengaluru, Hyderabad, Chhatrapati Sambhajinagar

Our Fire Hydrant System is a robust firefighting solution engineered to provide high-pressure water flow for emergency use in industrial, commercial, and residential premises. Designed and installed in compliance with IS 13039, NFPA 24, and NBC 2016 Part 4, this system ensures an uninterrupted water supply and pressure for firefighting operations. Key Components: Hydrant valves (landing valves) Hose reels & hoses Fire pumps & jockey pumps Underground/aboveground piping network Yard hydrants & breeching inlets Compliance & Standards: IS 13039 – Requirements for installation and maintenance of hydrant systems NFPA 24 – Private fire service mains & hydrants NBC 2016 – Layout, spacing & water storage norms for hydrants Applications: Factories, warehouses, high-rise buildings, hospitals, educational institutes, and large public facilities. Why Choose Us: We provide end-to-end service — site survey, hydraulic calculations, system design, supply, installation, commissioning, and annual maintenance contracts (AMC). All installations meet local fire department and authority guidelines, ensuring quick NOC approvals. Benefits: Rapid water availability during emergencies Durable materials for long service life Easy maintenance & accessibility Fully compliant with statutory fire safety codes

The Fire Pump Room System is the backbone of every firefighting installation, ensuring reliable water supply at adequate pressure to hydrants, sprinklers, and spray systems. Designed in compliance with IS 15301, NFPA 20, and NBC 2016, our pump room setups guarantee performance during emergencies. Introduction – The pump room houses main pumps, jockey pumps, diesel engines, electrical controls, and valves, forming the heart of the fire water supply system. Applications – Industrial plants, commercial complexes, IT parks, refineries, warehouses, hospitals, and high-rise buildings. Compliance – IS 15301 – Fire Pump Installation NFPA 20 – Installation of Fire Pumps NBC 2016 – Fire water supply requirements Benefits – Continuous water availability Fully automated with control panel Integrated monitoring for reliability Why Choose Us – We deliver complete turnkey fire pump room solutions including design, supply, installation, electrical wiring, hydro testing, and AMC.

Description: High‑efficiency centralized cooling for commercial, industrial and healthcare facilities using water‑cooled/air‑cooled chillers or VRF‑VRV systems. We size loads, perform pipe/duct routing, balance flows, and optimize controls to achieve target kW/TR and comfort across zones. Compliances: ASHRAE fundamentals (reference), IS HVAC practices, local ventilation & IAQ guidelines, OEM installation standards. Benefits: Lower energy use, stable comfort, quieter operation, and scalable capacity with zoning. Why Choose Us: Hands‑on balancing, neat detailing, vendor‑neutral design, and commissioning with measured TR, ΔT and kW/TR.

Description: Specialized cleanroom HVAC with controlled temperature, humidity, filtration and pressurization. We design airflow patterns, HEPA layouts, differential pressures and recovery rates for pharma, labs and electronics. Compliances: ISO cleanroom classes, cGMP guidance (reference), NABL/USFDA expectations (as applicable). Benefits: Regulatory readiness, consistent product quality, lower contamination risk, validated environmental control. Why Choose Us: Expert detailing, DQ/IQ/OQ documentation support, particle/airflow testing, and training for operations.

Description: Optimization of distribution architecture, transformer loading, cable sizing, APFC tuning, motor systems and drives to reduce losses and peak demand. Includes demand-side management, rightsizing, VFD retrofits, and operational set-points to maximize efficiency and uptime. Compliances: IS/IEC for switchgear, cabling, earthing; DISCOM metering norms; factory safety guidelines. Benefits: Lower technical losses, reduced maximum demand (kVA), fewer trips, safer system, measurable OPEX savings. Why Choose Us: Balanced engineering—no over-selling, just correct sizing, proven control strategies, and phased rollouts with KPIs.

Description: These systems condition raw water before it enters boilers, cooling towers, RO units, or process lines. Softening removes hardness (Ca/Mg) to stop scaling; Pressure Sand Filters (PSF) remove suspended solids and turbidity; Activated Carbon Filters (ACF) control color, odor, chlorine, and organics; Iron/Manganese filters protect downstream membranes and equipment. The result is longer equipment life, fewer shutdowns, and stable downstream performance. Compliances: Designed to meet target water specs derived from boiler/HVAC/RO supplier recommendations and IS references. Benefits: Protects capital equipment, reduces chemical and energy waste, improves RO life and heat-exchange efficiency, and offers low-CAPEX reliability. Why Choose Us: Correct media sizing and EBCT, auto/PLC valve options, duplexing for zero downtime, and lifecycle spares support—delivered as neat skid packages.

Description: Our Turnkey Fire Fighting Solutions are for industries, commercial buildings, hospitals, IT parks, warehouses, logistics hubs, and high-rise projects that want a single agency to handle the complete fire package. We take responsibility from concept and authority-compliant design to supply of approved materials, execution at site, testing/commissioning, fire department demonstration and final NOC. Systems are engineered as per NBC 2016, IS standards and NFPA references and can include hydrant, sprinkler, detection, gas suppression, pump room and passive fire protection as per project needs. This removes the headache of coordinating between designer, material vendor and installation contractor. Compliances: - NBC 2016 – Part 4 (Fire & Life Safety) - IS 13039 / IS 15105 / IS 15301 for hydrant, sprinkler and pump sets - IS 2189 / NFPA 72 for fire detection & alarm (when in scope) - NFPA 20 / NFPA 13 / NFPA 2001 (as applicable) - Local CFO / Fire Brigade requirements for provisional and final NOC Benefits: - One-point accountability – no multi-vendor disputes - Faster fire NOC because drawings, test certificates and demonstrations are handled together - Standardised and approved make materials → better reliability - Installation with testing (hydro, flushing, pump trials) and complete O&M handover - Option to continue with AMC from the same team Why Choose Us: - Govt-approved / class-A fire & safety contractor with multi-sector experience - Fire projects executed in industrial, healthcare, warehousing and commercial facilities - We prepare BOQ, GFC/shop drawings, test reports and as-built documents for authority - We train your operators on hydrant/sprinkler/pump panel so the system is actually usable - Local execution/support teams in Pune, Mumbai, Bengaluru, Hyderabad, Chhatrapati Sambhajinagar, and Pan India