'asme certified process equipment'

Description: Design‑supply of storage tanks, air receivers, and heat exchangers with correct materials, thickness, nozzles, supports, and inspection openings. We deliver data sheets, drawings, fabrication QA, hydro/pneumatic tests, and traceable certificates. Compliances: IS/ASME for pressure parts; TEMA for exchangers; statutory approvals where required. Benefits: Fit‑for‑purpose, safe, maintainable equipment with documented design basis and long service life. Why Choose Us: Clear engineering deliverables, third‑party inspection options, and supervised installation/erection with alignment checks.

Description: Process cooling networks designed for flow balance, NPSH, and temperature control—covering cooling towers, pumps, exchangers, and distribution. We minimize pumping power, ensure correct velocities, and plan chemical treatment points. Compliances: IS/ASHRAE guidance for cooling water; OEM guidelines for exchangers/pumps; water chemistry best practices. Benefits: Lower energy per m³, stable process temperatures, reduced fouling/scaling, and longer equipment life. Why Choose Us: Hydraulic modeling, debris management, treatment dosing, and well-documented O&M with KPIs for ΔT, approach, and cycles of concentration.

Description: Design and build of process control panels integrating PLCs, MCCs, and VFDs with field instruments and drives. We deliver clean wiring, labeling, interlocks, and tested logic so operations can trust the pushbuttons and screens. Compliances: IS/IEC for panels and wiring; ISA practices for control & alarm philosophy; safety interlocks per process needs. Benefits: Reliable control, reduced downtime, clearer diagnostics, and easier expansion. Why Choose Us: Panel GA & wiring drawings, IO lists, cause‑&‑effect, FAT/SAT, and comprehensive O&M/training packs.

Description: Comprehensive assessment of energy use across electrical, HVAC, utilities, lighting and processes to identify losses and savings potential. We benchmark consumption, profile loads, and quantify ROI-based measures to cut kWh, kVA and diesel consumption without compromising operations. Compliances: As per BEE audit guidelines, IS standards for measurement, and utility regulator norms for metering and billing analysis. Benefits: Lower bills (kWh/kVA), improved power factor, reduced demand charges, better equipment life, actionable CAPEX/OPEX plan with payback. Why Choose Us: Data-led approach with measurement & verification (M&V), practical recommendations, vendor-neutral BOQs, and post-implementation tracking.

Description: These systems condition raw water before it enters boilers, cooling towers, RO units, or process lines. Softening removes hardness (Ca/Mg) to stop scaling; Pressure Sand Filters (PSF) remove suspended solids and turbidity; Activated Carbon Filters (ACF) control color, odor, chlorine, and organics; Iron/Manganese filters protect downstream membranes and equipment. The result is longer equipment life, fewer shutdowns, and stable downstream performance. Compliances: Designed to meet target water specs derived from boiler/HVAC/RO supplier recommendations and IS references. Benefits: Protects capital equipment, reduces chemical and energy waste, improves RO life and heat-exchange efficiency, and offers low-CAPEX reliability. Why Choose Us: Correct media sizing and EBCT, auto/PLC valve options, duplexing for zero downtime, and lifecycle spares support—delivered as neat skid packages.

Description: Our Turnkey MEP Solutions are built for clients who want a single partner for all building services instead of coordinating 4–5 separate agencies. We take over the complete MEP-F scope – design coordination with architect/PMC, BOQ finalization, supply of approved makes, site execution, testing/commissioning and authority clearances (fire, water, DISCOM/CEIG as applicable). The result is a clash-free, inspection-ready, cost-optimised services package delivered by one accountable team. Mechanical (M) Scope: - HVAC: chiller / VRF-VRV / ventilation / pressurization - Utility piping where applicable - Equipment installation: AHUs, pumps, fans, cooling towers Electrical (E) Scope: - HT/LT panels, PCC/MCC/APFC, cabling & terminations - Earthing & lightning protection - DG/UPS/LV/ELV integration - Lighting & small power for building/common areas Plumbing (P) Scope: - Water supply & internal plumbing - Drainage, rainwater, harvesting connections - Domestic and firefighting pump rooms (segregated) Fire (F) Scope: - Hydrant, sprinkler, detection, gas suppression - Pump room and NOC documentation Compliances: - NBC 2016 – building services & fire - IS / ASHRAE good practices for HVAC - IS / IEC for electrical & earthing - Local plumbing/water supply bye-laws - DISCOM / CEIG / Fire Brigade requirements Benefits: - One vendor → one timeline → one handover - Common supports/trenches/shafts → cost optimisation - Faster authority approvals because documents come from one source - Easier for facility/maintenance teams to run systems post-handover Why Choose Us: - We already execute fire + LV + utilities → adding HVAC, electrical & plumbing is seamless - Experienced in factories, commercial, IT/office, hospitals, warehouses - Strong site management with DPRs, QAP, test reports and stage-wise billing - Local presence in Pune, Mumbai, Bengaluru, Hyderabad, Chhatrapati Sambhajinagar

Description: Our Clean Agent Fire Suppression System provides rapid fire protection for sensitive environments without leaving any residue. Designed as per IS 15493, NFPA 2001, and NBC 2016, this system uses agents like HFC-227ea (FM-200) or FK-5-1-12 (Novec 1230) for total flooding protection. Introduction – A Clean Agent System extinguishes fire by heat absorption and chemical reaction interruption while being safe for people and equipment. Applications – Data centers, control rooms, archives, server racks, telecom rooms, laboratories, and switchgear panels. Compliance – IS 15493 – Clean Agent Extinguishing Systems NFPA 2001 – Standard on Clean Agent Fire Extinguishing Systems NBC 2016 – Fire protection for special occupancies Benefits – Environmentally sustainable Non-conductive and residue-free Safe for occupied areas Quick activation within seconds Why Choose Us – We provide design, supply, installation, commissioning, and AMC for clean agent systems, ensuring full compliance with government fire authorities and easy NOC approval.

Our Inert Gas Fire Suppression System uses naturally occurring gases (Nitrogen, Argon, Inergen) to reduce oxygen levels and extinguish fires without damaging sensitive equipment. Compliant with IS 15493 and NFPA 2001, it is ideal for server rooms, archives, and control rooms. Benefits: 1. Non-conductive, residue-free 2. Safe for occupied spaces 3. Environmentally friendly Key Property: Gas Type – IG-01 / IG-55 / IG-541 Other Specifications: 1. Standard: IS 15493 / NFPA 2001 2. Storage Pressure: 150–200 bar 3. Cylinder Material: Seamless steel 4. Discharge Time: 60 seconds

Description: Our CO₂ Gas Fire Suppression System provides high-efficiency fire suppression using carbon dioxide, ideal for unoccupied areas where water or clean agents are not suitable. Designed as per IS 6382, NFPA 12, and NBC 2016, this system ensures rapid discharge and total flooding capability. Introduction – CO₂ suppresses fire by oxygen displacement and cooling effect, making it perfect for high-risk industrial applications. Applications – Power plants, generator rooms, turbine enclosures, paint booths, foundries, industrial machinery, cable tunnels. Compliance – IS 6382 – CO₂ Fire Extinguishing Systems NFPA 12 – Carbon Dioxide Extinguishing Systems NBC 2016 – Provisions for gaseous suppression Benefits – Rapid fire knockdown No water damage to equipment Cost-effective suppression solution Why Choose Us – We provide turnkey solutions from design to commissioning, including safety interlocks, alarms, and AMC services.