'fault level calculation and protection coordination'

Description: Robust high‑tension distribution engineered for reliability and safety—comprising incoming/outgoing feeders, protection relays, metering, and interlocks. We design and supply indoor/outdoor HT panels, RMUs and switchgear with correct fault level calculations, protection coordination, and compliance to DISCOM/CEIG requirements. Suitable for industrial plants, campuses, hospitals, IT parks, and logistics hubs. Compliances: IS/IEC for switchgear & controlgear; utility/DISCOM standards; CEIG approval norms; earthing & clearances per IS/IE Rules. Benefits: Higher uptime, safer operations, correct protection discrimination, scalable bays, and simpler statutory approvals. Why Choose Us: Accurate short‑circuit studies, relay settings, GA/SLD documentation, factory testing, site SAT/commissioning, and CEIG liaison support.

Description: Safe earthing networks and lightning protection designed per soil resistivity and building profile. We deliver earth grids, pits, bonding, SPD selection, and air‑termination/down‑conductors sized to handle faults and surges—protecting people, equipment, and data. Compliances: IS/IEC earthing & lightning standards; risk assessment per IEC 62305 where applicable. Benefits: Lower touch/step voltages, improved equipment safety, fewer nuisance trips, and better surge immunity. Why Choose Us: Measured soil tests, engineered layouts, resistance targets with test logs, and maintainable inspection chambers.

Description: Our Turnkey MEP Solutions are built for clients who want a single partner for all building services instead of coordinating 4–5 separate agencies. We take over the complete MEP-F scope – design coordination with architect/PMC, BOQ finalization, supply of approved makes, site execution, testing/commissioning and authority clearances (fire, water, DISCOM/CEIG as applicable). The result is a clash-free, inspection-ready, cost-optimised services package delivered by one accountable team. Mechanical (M) Scope: - HVAC: chiller / VRF-VRV / ventilation / pressurization - Utility piping where applicable - Equipment installation: AHUs, pumps, fans, cooling towers Electrical (E) Scope: - HT/LT panels, PCC/MCC/APFC, cabling & terminations - Earthing & lightning protection - DG/UPS/LV/ELV integration - Lighting & small power for building/common areas Plumbing (P) Scope: - Water supply & internal plumbing - Drainage, rainwater, harvesting connections - Domestic and firefighting pump rooms (segregated) Fire (F) Scope: - Hydrant, sprinkler, detection, gas suppression - Pump room and NOC documentation Compliances: - NBC 2016 – building services & fire - IS / ASHRAE good practices for HVAC - IS / IEC for electrical & earthing - Local plumbing/water supply bye-laws - DISCOM / CEIG / Fire Brigade requirements Benefits: - One vendor → one timeline → one handover - Common supports/trenches/shafts → cost optimisation - Faster authority approvals because documents come from one source - Easier for facility/maintenance teams to run systems post-handover Why Choose Us: - We already execute fire + LV + utilities → adding HVAC, electrical & plumbing is seamless - Experienced in factories, commercial, IT/office, hospitals, warehouses - Strong site management with DPRs, QAP, test reports and stage-wise billing - Local presence in Pune, Mumbai, Bengaluru, Hyderabad, Chhatrapati Sambhajinagar

Description: Our Fire Sprinkler Systems are designed for automatic fire suppression, ensuring localized and immediate control over fire outbreaks. Compliant with IS 15105, NFPA 13, and NBC 2016, these systems are suitable for offices, malls, factories, and warehouses. Key Components: Sprinkler heads (pendent, upright, sidewall) Distribution piping & alarm valves Water supply pumps & tanks Flow switches & monitoring systems Compliance: IS 15105 – Design & installation requirements for sprinkler systems NFPA 13 – Standard for installation of sprinkler systems NBC 2016 – Fire zone & occupancy-specific guidelines Why Choose Us: We carry out hazard classification, hydraulic calculations, and layout optimization to deliver maximum protection with minimum downtime. Our AMC services ensure your system is always ready to perform. Benefits: Quick suppression at fire origin Reduces smoke & property damage Automatic activation without human intervention

Description: Design and installation of safe, code-compliant fuel oil storage and transfer systems for boilers, furnaces, and DG sets. Includes tanks, day tanks, pumps, strainers, heating (if required), level instrumentation, leak detection and interlocks. Compliances: PESO/CCOE norms for storage & handling; IS fire safety practices; electrical hazardous area classification where applicable. Benefits: Reliable supply, spill/leak minimization, improved burner performance, safer operation. Why Choose Us: Right materials & heat tracing, double-walled lines (as needed), tidy routing, alarms, and tested logic for start/stop and high/low levels.

Description: Outdoor and industrial lighting engineered for lux uniformity, safety, and energy efficiency. We perform lighting layout, pole selection, optics, and controls—covering streets, yards, factories, and warehouses. Compliances: IS lighting practices; local electrical codes; recommended lux levels per application. Benefits: Better visibility & safety, lower energy bills, reduced maintenance with long‑life luminaires. Why Choose Us: Lighting calculations, correct optics, surge‑protected drivers, and scalable control options from simple timers to IoT.

Description: Site-wide storm water systems handling peak monsoon flows via catch pits, gratings, roadside drains, and underground pipes to outfalls/recharge structures. We design gradients and capacities to prevent flooding, waterlogging, and damage to roads, basements, or landscaping. Compliances: Local municipal storm-water norms; NBC/CPHEEO guidance for drainage design. Benefits: Flood-safe site, longer pavement life, clean landscaped areas, reduced complaints and downtime. Why Choose Us: Accurate hydraulic calculations, proper silt control, accessible chambers, and as-built levels that actually match site contours.

Description: Our Turnkey Fire Fighting Solutions are for industries, commercial buildings, hospitals, IT parks, warehouses, logistics hubs, and high-rise projects that want a single agency to handle the complete fire package. We take responsibility from concept and authority-compliant design to supply of approved materials, execution at site, testing/commissioning, fire department demonstration and final NOC. Systems are engineered as per NBC 2016, IS standards and NFPA references and can include hydrant, sprinkler, detection, gas suppression, pump room and passive fire protection as per project needs. This removes the headache of coordinating between designer, material vendor and installation contractor. Compliances: - NBC 2016 – Part 4 (Fire & Life Safety) - IS 13039 / IS 15105 / IS 15301 for hydrant, sprinkler and pump sets - IS 2189 / NFPA 72 for fire detection & alarm (when in scope) - NFPA 20 / NFPA 13 / NFPA 2001 (as applicable) - Local CFO / Fire Brigade requirements for provisional and final NOC Benefits: - One-point accountability – no multi-vendor disputes - Faster fire NOC because drawings, test certificates and demonstrations are handled together - Standardised and approved make materials → better reliability - Installation with testing (hydro, flushing, pump trials) and complete O&M handover - Option to continue with AMC from the same team Why Choose Us: - Govt-approved / class-A fire & safety contractor with multi-sector experience - Fire projects executed in industrial, healthcare, warehousing and commercial facilities - We prepare BOQ, GFC/shop drawings, test reports and as-built documents for authority - We train your operators on hydrant/sprinkler/pump panel so the system is actually usable - Local execution/support teams in Pune, Mumbai, Bengaluru, Hyderabad, Chhatrapati Sambhajinagar, and Pan India

Description: Corporate Fire & Safety Training is our training-division service for organisations that want their people to actually know how to respond, not just attend a PPT. Modules are built from our real project experience and delivered using live demonstrations, hands-on extinguisher use, mock drills and role-play for ERT members. We tailor content to your industry (manufacturing, construction, food, IT/ITES, pharma, healthcare, hospitality). Training Modules : - Basic fire prevention & firefighting - Advanced / system-based firefighting (hydrant, sprinkler, gas suppression) - First aid & basic medical emergencies (CPR, bandaging, lifting) - Evacuation mock drill / ERT formation - Construction site safety - Behaviour-based safety (BBS) - Defensive driving / road safety - Food safety / hygiene / GMP-HACCP awareness - POSH – Prevention of sexual harassment at workplace - Social engineering / human-factor security Compliances: - Supports NBC requirements for fire training & drills - POSH awareness as per POSH Act 2013 (awareness level) - Supports ISO 45001 / customer / buyer / factory inspector audit observations Benefits: - Improves real emergency response time - Reduces panic & confusion during fire/medical incidents - Provides training records for audits, clients and EHS teams - Builds safety culture and accountability on shopfloor/site Why Choose Us: - We are an execution company first – so training is practical and system-oriented - Trainers from fire/EHS/medical background - Can train on your actual installed systems (your hydrant, your panel) - We provide attendance sheets, photos and training report - Available across Pune, Mumbai, Bengaluru, Hyderabad, Chhatrapati Sambhajinagar